Photovoltaic Wire (PV Wire) is used as a interconnection wire for photovoltaic power systems. 50-feet long 12 AWG Photovoltaic PV connection cable is ideal for connecting solar panels either in series or parallel. Features one MC4 male connector at one end and one MC4 female connector at the other. UL & ROHS compliant.
Solar Panel Cable 30 Ft - Mc4 Pv Extension- 8 AWG - 600vdc- Sunlight Resistant
Manufacturer: Unlimited Solar
Brand: Unlimited Solar
( DESCRIPTION ) This may be used to extend one wire 30 feet to another MC4 connection, or cut in half to extend both positive and negative wires 15 feet to normal wire connections. ( SOLAR PV WIRE ) UL 4703 Solar PV wire is one such cable. It is ozone, UV, and moisture resistant cable used for interconnection wiring in photovoltaic systems. It is a durable cable rated at 90Â°C wet and up to 150Â°C in dry applications. It can be rated to 600, 1000, or 2000 volts. PV Wire can be used as underground service entrance wire, and is appropriate for both grounded and ungrounded PV arrays. PV Wire meets UL Standard 4703.( RoHS Compliance ): RoHS compliance means that the cable is free of hazardous substances, making it even greener! Choosing solar power cables designed with non-hazardous materials puts an environmentally friendly cable in an environmentally friendly application, and it doesn't get much better than that! ( APPLICATIONS ): Type Photovoltaic copper conductors are suitable for outdoor rooftop applications without conduit and for use in conduits and raceways installed underground in conduit in wet locations, and where condensation and moisture accumulations within the conduit do not exceed 90ÂºC. Applications requiring direct burial is permitted for Type Photovoltaic per UL-854. Applications requiring type Photovoltaic conductor, temperatures shall not exceed 90ÂºC in wet or dry locations. ( FEATURES ):Available in 600V and 1000V/2000V. All cables comply with UL's VW-1 (Vertical Wire) Flame Test. Insulation compounds are rated for flame and sunlight-resistance in all sizes and colors. Photovoltaic conductors of 1/0 through 1000 KCMIL are rated for CT use. Sequential foot markings located every foot on master reels only for 1 AWG through 1000 KCMIL unless otherwise specified.RoHS compliant. Flexibility at Low Temperature Test. Carries -40C rating.
Photovoltaic Wire (PV Wire) is used as a interconnection wire for photovoltaic power systems. 100-feet long 12 AWG Photovoltaic PV connection cable is ideal for connecting solar panels either in series or parallel. Features one MC4 male connector at one end and one MC4 female connector at the other. UL & ROHS compliant.
Description: This product is a part of Renogy Rail Mount System. Renogy Rail Mount System is designed to support on-grid and off-grid systems, as well as all Renogy panel sizes. To complete this system, you would also need L-Foot, End Clamps, Rail Splice, and Rails(sold separately). It makes the installation of long, continuous rows of panels easy. The Rail Mount System supports any row length required for a project. The system is designed to be used on flat, rigid surfaces to ensure system stability. Recommended Tools (Not Provided): â€¢ Socket Wrench â€¢ Tape Measure and Protractor â€¢ 6mm Hex key â€¢ Chalk snap line Please Note: This item is not structural or UL certified. If you have any questions regarding this product, please give us a call at 1 (800) 330-8678 or email email@example.com. Specifications: Material: Aluminum 6063 Surface Roughness: B, C Wind Speed: â‰¤ 60m/s Snow Load: â‰¤ 1.4KN/m2 Warranrt Information: 1-year material warranty We sell entire home/business solar system both on grid and off grid, including racking, inverters and other system components. Please call us 909-517-3598 and extension sales.
GO POWER 30' EXPANSION CABLE ACCESSORY FOR THE PORTABLE SOLAR KITS
Manufacturer: All Power Supply, Inc
Brand: Go Power!
You can extend the distance of the kit from your battery by using the extra 30' of cable to increase your sunshine footprint where there is foliage overhead. Park in the Shade - Charge your batteries in the Sun! 12 Volt systems
250 Feet Tabbing Wire Pre-coated w/ Solder for DIY Solar Cells Panel
Manufacturer: Everbright Solar
Brand: Everbright Solar
Due to popular demand, we are making our Tabbing Wire that are part of our DIY solar cells kit available for purchase individually for DIY solar panel makers. This listing contains 250 feet tabbing wires. Item details: This tabbing wire is perfect for the Do It Yourself folks to build your own solar modules. The wires are pre-tinned so it's very easy to solder on. *Tabbing Wire Specification: Size: 0.2mm x 1.6mm (thickness x width) Solder Thickness: 0.05 +/- 0.01mm Solder Type: 60/40 (sn/pb)
CoZroom Solar Panel Z Bracket Set 8 Units for RV Roof Boat Mounts Kit Aluminum
All parts needed for installing are included in this kit Only one click will be enough to order all tools that are required to install a solar panel. The individual pieces are all durable and sturdy made for long-term usage. CoZroom Mounting Brackets are designed for installation of single solar panel units, especially for irregular surfaces. The units are ideal for installation on an RV, a boat, a garage or a shed. Makes installation quick, easy and affordable Install smaller solar systems with ease and comfort by ordering this kit. A simple and yet reliable method to install your solar system on any surface you need to install it. This kit is suitable for mounting solar systems up to 150W. Get your tools ready to install your solar system and order this easy kit that contains everything you need. Package contains: 8 x Solar Panel Brackets 8 x Short Bolts 8 x Nuts 16 x Long Cap Bolts