Blue Sky Energy Solar Boost 2000E 12V/25A Charge Controller
Manufacturer: Blue Sky Energy
Brand: Blue Sky Energy
IPNPRO Battery Monitor with Shunt This Solar Boost 2000E provides a precision Multi-stage Pulse Width Modulation (PWM) charge control system to ensure the battery is properly and fully charged, resulting in enhanced battery performance with less battery maintenance. An equalize function is also included to periodically condition liquid electrolyte lead-acid batteries.A built in LCD digital display monitors solar charge performance. The display shows battery voltage, solar panel current and output charge current. You can actually see current boost working by knowing the differences between solar panel current and output charge current. Specifications:
Digital control board delivers precision CO2 control. Maximize your CO2 production while minimizing CO2 or LP consumption. Adjust CO2 set point, modify elevation or calibrate with just two buttons. Controls any CO2 equipment that is operated by 120 volt power. Durable powder coated, steel enclosure will stand up to the toughest conditions. Adds CO2 only during daylight period using the controllers integrated photocell. 50 parts per million (ppm) dead band/hysteresis built into set point. Memory retains controllers setting even when the power is off. 15 Amps/120 Volt/60 Hz./3 year warranty.
Sun YOBA Solar Charge Controller Solar Controller 60A 12V 24V CM6024Z
Manufacturer: Sun YOBA
Brand: Sun YOBA
60A Solar Panel Charge Controller Regulator 12V/24V Compatible with 1440W(24v) solar panel with dark activated function, Max current is 60A12V Battery supports max 720W solar panel. 24V Battery supports max 1440W solar panel. Cannot use 24V solar panel charge 12v battery, vice versa 60A Solar Panel Charge Controller 12V/24V + LCD display CM50 Compatible with MAX 1440W Solar Panel 12V/24V Auto Switch; Timer Intigrated (Lighting function) CM60 Series controller has the following features: 1. Visual LCD graphic symbol. 2. Brief key operation. 3. Grade auto switch of system voltage. 4. Intelligent PWM Charging Mode. 5. Auto temperature compensation. 6. Adjustable charging & discharging parameter. 7. Settable working modes of loads. 8. Accumulative function of charging & discharging AH. 9. Remote Monitoring Function. 10. Protection for battery back discharging. 11. Protection for battery low voltage. 12. Overloading & short-circuit protection. 13. Battery reversed protection. 14. Delayed auto restart after overloading protection. CM60 Datasheet Output Voltage: 12V/24V Automatically distinguish voltage Max load Current:Less than or equal to 12A Full Charge Cut:13.7V/27.4V Low Voltage Cut:10.5V/21V Temp ompensation:-4mv/ centigrade /cell Zero Load Loses:Less than or equal to 30mA Voltage Drop:
Features: *Externally installed temperature sensor is capable of high-accurate temperature compensation. *Parameter settings can be stored if there is power failure. No need for repeated setting.Usage is simple and convenient. * Various kinds of status indication. * Protection againse over-charge ,over discharge and overload, protection against electronic shortcircuit and reverse connection. *TVS lightning protection. *MPPT charge mode (SOS). Note: *You had better connect to the battery first when you operate the system. *Keep the children away from the solar system. Package contents: 1*MPPT Waterproof Timer IP68 Solar Controller 1*User Manual
HVA Charge Controller for Wind Turbine Generators & Solar Panels
Brand: Missouri Wind and Solar
Key features of this controller are:
Microprocessor controlled -- This is very important for both stability and functionality.
User changeable settings -- Several controllers on the market set the dump level, and that's that!
Super High amp rating - **440 Amps, up to 10,000 watts. 440 amps surge, 125 amps continuous.
Works directly with 12, 24 or 48 volt systems. -- The relay contacts can handle open collector voltages of up to 120 volts.
High Contrast LED battery voltage. - Several controllers do not tell you what's going on - This one does!
High Contrast LED turbine amperage meter -- Measures 3 digits to the left of the decimal, 2 digits to the right.
Meters can be shut using the on/off switch.
Two factory installed, fully wired D/C breakers and disconnects.
Entire unit is wired and ready to go for both wind and solar.
Battery status LED
Push to test. -- Ever wonder if your controller & load are working OK?
Large (8" x 12") solid steel enclosure, with multiple conduit knockouts
Large enough terminal blocks that you can actually terminate large wire (See notes below.)
The electronics are fully isolated from the enclosure, no ground loops.
Draws almost no energy while monitoring (all electronics must use some power, to work -- this is a miser)
Reverse Polarity protected.
Can handle ten, 1000 watt wind turbines, or up to 125 Amps of continuous solar power, or both at the same time. Note that 440 amps is not continuous, but is limited to 20% duty time.
**150 amp heat activated breakers have been installed to limit continuous current to 150 amps. Instantaneous current handling of this unit not to exceed 440 amps.
**The solenoid in this unit has been tested to over 440 amps. We have installed two 150-amp breakers as a standard configuration.
Sun YOBA 20A 12V/24V Auto Identify PWM Solar Panel Battery Charge Controller with 5V USB
Manufacturer: Sun YOBA
Brand: Sun YOBA
Color: 20A 12/24V
Feature: 1. Use single-chip microcomputer as the core of the whole control system, which makes the controller has the advantages of intelligent, strong adaptability, reliable function etc. 2. Use CMTP03 version optimized design scheme, which can improve system efficiency and prolong the life span the battery. 3. Use SMT chip production technology, industrial class chip, advantaged technology, quality assurance. 4. With over charge, over discharge, eletronic short circuit, overload and reverse polarity protection. 5. Use series connection PWM circuit, it is 3%-6% more effective than non-PWM circuit when charging. 6. With LED to show the current battery state, it is easy for the user to know the working condition of the controller right now. 7. Use industrial grade chip, it can work properly under environment such as cold, high temperature , humid. 8. Delicate shell design and compact circuit, the whole controller does not occupy too much space. 9. Use internal integration precision resistors and other components in oder to improve the precision of controller parameters. 10. With 12V DC (750mA) and 5V USB (500mA) output, which can charge for mobile phone and other small appliance. Package Includes: 1x Solar Controller 1x DC 12V Cable 1x English Instruction Mannual
HQRP 40 Amp Solar Battery Charge Controller / Regulator 40A 12V / 24V Auto Charging for Solar Power System with Street Lighting Control plus HQRP UV Meter
HQRP PWM Solar Charge Controller HQRP PWM Solar Charge Controller with LED Indicator. It is easy and convenient to use. Great for Solar Home System. System indicator: - Solar Panel Indicator - Battery State Indicator - Load State Indicator - Temperature Sensor Protective functions of the controller: - Protection against reverse polarity of solar modules - Protection against reverse polarity of connected battery - Short-circuiting at the module input - Short-circuiting at the load output - Protection against over charging - Reverse current protection at night - Overvoltage and under voltage protection - Overload protection at load output - Deep discharging protection/low voltage disconnect Solar Controller supports up to 600W of 12V Solar panels and up to 1200W of 24V Solar panels. For 12V solar panels, please, use battery and load for 12V solar systems (For 24V solar panels, please, use battery and load for 24V solar systems). HQRP UV Meter: This meter shows you the level of UV and helps you protect your eyes and skin from negative sunlight effect. The color of the meter changes from very light purple to dark purple depending on the intensity of the UV lighting. The darker the purple color is, the more intense is the UV lighing.
ALEKO 450W Wind Generator is 450W 12 volt model. Fresh 2013 version just shipped from the factory. This is the latest design model. This item is new in the factory unopened box. Comes with Free Charge Controller CD5.0, instruction manual and 1-year warranty from purchase date.
Nature Power 70500 Wind Turbine with MPPT Charge Controller, 400-Watt
Manufacturer: RDK Products
Brand: Nature Power
The Nature Power 12V 400 Watt Wind Turbine harnesses the energy of wind to create clean, renewable energy for your home, cabin, farm, work sites or anywhere standard power is to expensive or not available. This wind generator is used to charge 12 volt batteries and mounts on any 1.5 inch Schedule 40 pole. Constructed from lightweight, weatherproof cast aluminum and marine grade paint coating, this renewable energy generator can withstand the harshest of environments. The unit can begin generating power with at a low 7 mph wind and reaches maximum power of 400 watts or 27 amps at 28mph. Built in cut-out system prevents from going over the rated output and being damaged. The carbon fiber composite blades ensure low wind noise. Blade Diameter (in.): 46, Blade. Dimensions L x W x H (in.): 26 x 42 x 42, Assembly Required: Yes. Mounting Pole not included.