Sun YOBA Solar Controller Solar Regulator 20A 12V 24V with 5V USB Charging
Manufacturer: Sun YOBA
Brand: Sun YOBA
Color: 30A 12V/24V
Brief description:M30A solar controller applied to the solar photovoltaic system which is used to coordinate solar panels, storage battery and load. It is a very important assembly in the photovoltaic system. It is different from other solar controllers that it is add the comprehensive protection function makes the whole solar photovoltaic system operate efficiently and safely.M30A solar controller can adjust automatically the working voltage of solar panels, which can make solar panels work consistently in the maximum power point of the V-A characteristic curve in a whole day. Compared with common solar controllers, it is equipped with temperature compensation function, can make the work efficiency of photovoltaic modules increased by 30%, and can observably prolong the life of the storage battery.M30A:M30A Solar Panel Charge Controller Regulator Solar panel 380W/12V 760W/24VCompatible with 760W(24v) solar panel with dark activated function, Max current is 30A Timer Intigrated (Lighting function)Features:1. LCD screen display2. Easy operation interface3. PWM charging mode4. Parameter user can reset,5. A key to open and close the load,6. A key to restore the factory settings,7. Battery reverse discharge protection,8. Battery reverse polarity protection9. Battery under voltage protection,10. Overload, short-circuit protection,11. Automatic temperature compensation function,12. Can charge and discharge at the same time,Always keep the battery in full status13. USB 5V charging (for 500mA) for mobile phone.NOTE: Optional USB 5V charging (500mAÂ£Â¬Not suitable Apple iphone 5 5G)Package contents:1x Solar Controller1x English User Manual1x Temp. Sensor
SEE PHOTO GALLERY FOR ALL TECHNICAL INFORMATION AND DIMENSIONAL DRAWING. WindyNation's P30 Solar Charge Controller uses advanced microprocessor technology to properly charge and maintain the charge of 12 and 24 volt batteries. The P30's PWM (pulse width modulated) battery charging technique increases the lifetime of batteries by properly charging the battery through a Bulk, Absorb and Float charging process. The PWM capability also allows the controller to operate very efficiently and consume very little power.
Morningstars TriStar MPPT TS-60 solar controller features TrakStar Technology an advanced maximum power point tracking MPPT battery charger for off-grid photovoltaic PV systems up to 3kW. The controller provides the industrys highest peak efficiency of 99 and loses significantly less power compared to other MPPT controllers. This particular model includes a Remote Temp Sensor. The TriStar MPPT features smart tracking that maximizes the energy harvest from the PV by rapidly finding the solar array peak power point with extremely fast sweeping of the entire I-V curve. Unlike the MPPT TS-45 the MPPT TS-60 has an ethernet port for a fully web-enabled interface. Both products allow you to log up to 200 days of data.Features. Maximizes Energy Harvest.. Better peak power point tracking than other MPPT controllers.. Very fast sweeping of the entire I-V curve.. Recognition of multiple power points during shading or mixed PV arrays.. Excellent performance at sunrise and low solar insolation levels.. Extremely High Reliability.. Robust thermal design and no cooling fans.. Parallel circuit design provides less stress and longer life for electronic components.. No mechanical relays.. Extensive electronic protections including PV short circuit protection.. Epoxy encapsulated inductors and conformally coated printed circuit boards.. Very High Efficiency.. Peak efficiency of 99.. Proprietary tracking algorithm minimizes power losses.. Low self-consumption.. Continuous operation at full power to 45C without need to de-rate.. Selected electronic devices with higher ratings to minimize losses from heating.Specifications. Maximum Battery Current - 60 amps.. Nominal System Voltage - 12 24 36 or 48 volts DC.. Dimension - 11.4 x 5.1 x 5.6 in.. Item weight - 11lbs.
Midnite Solar Classic 150 Charge Controller 150VDC Input MPPT
Manufacturer: MidNite Solar
Brand: MidNite Solar
Model: Classic 150
Classic 150 Charge Controller 150VDC Input MPPT Controller The Classic MPPT Charge Controller soon stand the renewable energy industry itï¿½s ear. The Classic will substantially increase the flexibility, features and range currently found on MPPT controllers. This MPPT controller has Arc Fault Detection, making this controller the safest controller available. With the Classic 150 ranging up to 96 amps, why would you need any other controller. The Classic will be the only real ï¿½Made in Americaï¿½ charge controller. User will be satisfied and product quality is guaranteed. Features: 150V operating voltages 12-72V battery charging standard with models up to 120V battery bank Built in DC-GFP and Arc Fault Detector Solar, wind and hydro MPPT modes Ethernet, USB and RS232 Can hook up wirelessly via Wiâ€Fi bridge to communicate to an in house Wiâ€Fi router Remote and local displays possible 32 megs of data logging Specifications: Rated Input Voltage (Operating Voltage): 150VDC Max HyperVOC: 150+ Battery Maximum PV Input: 204V Battery Charge V: 12-93 Maximum Rated Output Voltage: 98 Volts, Maximum for 72V nominal battery bank Environment: -40 to 40 C SpecificationsBrand: MidNite Solar Â Output Voltage: 98V Â Input Voltage: 150VAC | VDC Â Length: 14.87" Â Height: 4" Â Width: 5.95"
SainSonic MT-1 LCD Display Remote Meter For Duo Battery Solar Charge Controller with 10 Meters Wire
Remote digital display for the 10Amp/20Amp Duo- Battery Solar Charge Controller.
Ideal for monitoring and display current solar system status. Displays both
solar voltage and battery voltage as well as charging current and load current.
Shows Amp-Hour and Watt-Hour charge accumulation as well as percentage the
batteries are charged. Easy to use and program and is ideal for a quick system
check. Wall mounting board, can be mounted in or on the wall.
The digital Remote Meter displays system operating information, error
indications, and self-diagnostics read-out. Information is displayed on a
backlit LCD display. The large numerical display and icons are easy to read and
large buttons make navigating the meter menus easy.The MT-1 connects to the RJ45
port on the controller
The two LED indicators above the LCD show that battery is charging, and a red
indicates error conditions.The LCD has two different brightness levels. After
any button is pressed the display will be in high brightness and backlight. To
save power, the backlight automatically turns off after 30 seconds.
* Rated voltage: 12V
* Min voltage (suggested): 8.0V
* Strong backlight on:
GSM CYC-SOLC10A 10 AMP Solar Charge Controller, Black
Manufacturer: GSM LLC
The 10 AMP Solar Charge Controller by Cyclops Solar Solutions regulates and protects 12 volt batteries from overcharging and discharging. This charger is maintenance-free protection for your solar panel and batteries and is also small, compact and easy to mount. It handles up to 10 AMP (130 Watts) of array current. There are 2 LED charging lights that indicate the charging status: Green= Charged Yellow=Charging. It can be used with gel-cell and lead-acid 12 volt batteries, and is highly recommended for any solar panel rated 9 watts and over. It is compatible with any 12 volt solar panels.
Specification: Condition: Brand new Package includes: 1x Daytime running light controller Input voltage: DC12V-14.8V Output power: Max. 16W Features: Come with safety fuse with the anode wire. Easy wiring, please follow the diagram on the back of controller. Great add on item for controlling headlamp, DRL or side lights. Allow you to connect your DRL lights so that when you start the car the lights turn on and then when you turn you headlights on the DRL will turn off! Complies with EU regulations as the DRL are designed for daytime use only. Please Read All Description Before Ordering the Product. *Notice: please note that normally it will take 7-14 days for our customers to receive the package.
Why we recommend buy MPPT Solar Controller?
MPPT circuit solar controllers are considerably more elaborate than PWM. The voltage of the solar panel changes with time of day and temperature. The optimum voltage for battery charging changes as the state of charge of the battery. The MPPT charge controller matches these voltages and can result in 30% more efficient transfer of power. This means good MPPT solar charge controllers can reduce the number of solar panels needed by up to 30%- a tremendous benefit. Even if the excess panels are purchased, benefits are realized in a Grid Tie system because more electricity can be sold back to the grid. While only a small part of system price, a MPPT solar panel charge controller can leverage the rest of the system to better performance.
* Model No: Tracer-2210RN
* Nominal System Voltage: 12VDC | 24VDC Auto work
* Rated Battery Current: 20A
* Maximum Battery Voltage: 32V
* Max. Solar Input Voltage: 100VDC
* Max. PV input power: 12V/ 260W 24V /520W