50A MPPT Solar Charge Controller Max PV Input 150VDC- LCD Display- 12V/24V Auto
Brand: Solar Odyssey
MPPT circuit solar controllers are considerably more elaborate than PWM. The Maximum Power Point Tracker (MPPT) circuit is based around a synchronous buck converter circuit. The voltage of the solar panel changes with time of day and temperature. It steps the higher solar panel voltage down to the charging voltage of the battery. Odyssey MPPT tries to maximize the watts input from the solar panel by controlling the duty cycle to keep the solar panel operating at its Maximum Power Point. This means good MPPT solar charge controllers can reduce the number of solar panels needed by up to 30%, a tremendous benefit.
Wire Terminals Cross Section [4 mm2 ]
Working temperature -35 to +125 F
NOTE: MPPT requires that two or more Solar panels must be connected in series than parallel to charge 12V or 24V battery systems.
For 12 Volt Battery Setup: Solar Panel Voltage Vmax input range is 20V to 150V dc.
For 24 Volt Battery Setup: Solar Panel Voltage Vmax input range is 40V to 150V dc.
Model: 450W 12 Volt
ALEKO 450W Wind Generator is 450W 12 volt model with blades. Fresh 2013 version just shipped from the factory. This is the latest design model. This item is new in the factory unopened box. Comes with instruction manual and 1-year warranty from purchase date.
Tristar Digital Meter for Morningstar Tristar Charge Controllers
Brand: Morning Star
This controller mounts directly to TS45 or TS60 charge controllers. Morningstar's TriStar Meter-2 (TS-M-2) and TriStar Remote Meter-2 (TS-RM-2) are advanced digital meters that may be used with any TriStarTM solar controller. These two meters are identical except that the TS-M-2 is mounted on the controller and the TS-RM-2 is flush mounted up to 30 meters (98.4 feet) away from the controller. The TriStar meters are 2 x 16 character LCD's that display extensive system and controller information, logged data, bar graph metering as well as alarms and faults for easy troubleshooting. The information may be shown in English, French, German, Portuguese or Spanish languages. In multi-controller systems the TS-M-2 and TS-RM-2 are networkable using Morningstar's MeterHub to allow individual controller data and aggregate system data to be displayed together on a single meter.
Sun YOBA Solar Controller Solar Regulator 20A 12V 24V M20
Manufacturer: Sun YOBA
Brand: Sun YOBA
Color: 20A 12V/24V
Brief description:M10A/20A/30A solar controller applied to the solar photovoltaic system which is used to coordinate solar panels, storage battery and load. It is a very important assembly in the photovoltaic system. It is different from other solar controllers that it is add the comprehensive protection function makes the whole solar photovoltaic system operate efficiently and safely.M10A/20A/30A solar controller can adjust automatically the working voltage of solar panels, which can make solar panels work consistently in the maximum power point of the V-A characteristic curve in a whole day. Compared with common solar controllers, it is equipped with temperature compensation function, can make the work efficiency of photovoltaic modules increased by 30%, and can observably prolong the life of the storage battery.M20A:M20A Solar Panel Charge Controller Regulator Solar panel 260W/12V 520W/24VCompatible with 520W(24v) solar panel with dark activated function, Max current is 20A Timer Intigrated (Lighting function)Features:1. LCD screen display2. Easy operation interface3. PWM charging mode4. Parameter user can reset,5. A key to open and close the load,6. A key to restore the factory settings,7. Battery reverse discharge protection,8. Battery reverse polarity protection9. Battery under voltage protection,10. Overload, short-circuit protection,11. Automatic temperature compensation function,12. Can charge and discharge at the same time,Always keep the battery in full statusPackage contents:1x Solar Controller1x English User Manual1x Temp. Sensor
Manufacturer: Synthesis Power Corp
Brand: Morning Star
These are the "Top of the line" in charge controllers for small systems. The ProStar 15 features "intelligent" charge controlling that will significantly improve battery life and performance.
Settings for sealed or flooded batteries, low voltage disconnect, temperature compensation and PWM (pulse width modulation) battery charging.
Solar amps and load amps.
For 12V or 24V systems, rated PV current 15 amps, rated load current 15 amps.
Battery Vdc (voltage direct current): 12/24
Solar Amps: 15 A
Load Amps: 15 A
Weight: 1 lb./.45 kg.
Dimensions: 6" x 4.1" x 2.1"/152.4 x 104.14 x 53.34 mm
Warranty info: 5 year limited warranty from manufacturer
MPPT Tracer 2215RN EP Solar Charge Controller Regulators 20A + Remote Meter LCD Display (MT5) for Solar Regulator with 2 Meters Cable
Why we recommend buy MPPT Solar Controller?
MPPT circuit solar controllers are considerably more elaborate than PWM. The
voltage of the solar panel changes with time of day and temperature. The optimum
voltage for battery charging changes as the state of charge of the battery. The
MPPT charge controller matches these voltages and can result in 30% more
efficient transfer of power. This means good MPPT solar charge controllers can
reduce the number of solar panels needed by up to 30%- a tremendous benefit.
Even if the excess panels are purchased, benefits are realized in a Grid Tie
system because more electricity can be sold back to the grid. While only a small
part of system price, a MPPT solar panel charge controller can leverage the rest
of the system to better performance.
* Model No: Tracer-2215RN
* Nominal System Voltage: 12VDC | 24VDC Auto work
* Rated Battery Current: 20A
* Maximum Battery Voltage: 32V
* Max. Solar Input Voltage: 150VDC
* Max. PV input power: 12V/ 260W 24V /520W
Sun YOBA Solar Charge Controller Solar Controller 30A 12V 24V Solar30
Manufacturer: Sun YOBA
Brand: Sun YOBA
Solar LCD series a kind of intelligent, multipurpose solar charge and discharge controller. Features: - Visual LCD graphic symbol - Brief key operation - Grade auto switch of system voltage - Intelligent PWM Charging Mode - Auto temperature compensation - Adjustable charging & discharging parameter - Settable working modes of loads - Accumulative function of charging & discharging AH - Remote Monitoring Function - Protection for battery back discharging - Protection for battery low voltage - Overloading & short-circuit protection - Battery reversed protection - Delayed auto restart after overloading protection - CE & RoHS Certification Intelligent Solar Charge Controller User's Manual Please read this instruction carefully before using it Note: When connecting a solar system, please connect the battery to the solar controller first and then the solar panels and the loads; when disconnect the solar system, disconnect the solar panel to the solar controller first and then the battery and the load. For the solar system safety, we suggest that the inverter should connected to the battery. Package Included: 1x solar regulator 1x English Manual 1x Temp Sensor