The Sunforce 60012 7 Amp Charge Controller prevents overcharging and discharging of 12 Volt batteries. It is intended for use with 12 Volt solar panels and maintains 12 Volt batteries in a fully charged state. It can handle up to 7 amps of array current and up to 105 watts of solar power. The controller is easy to use with a yellow charging light that indicates that your battery is charging, and a green light that indicates a fully charged battery.
Sunforce 50013 1-Watt Motorcycle and Powersports Solar Battery Charger
Color: Solar Cell
The Sunforce 50013 1-Watt Power Sports Charger is the perfect solution for charging the batteries of motorcycles, personal water crafts, ATVs, snowmobiles and more. Constructed with amorphous solar cells, this solar panel is maintenance-free and extremely easy to install. With its built-in overcharge / discharge protection, this top of the line solar panel works in all daylight conditions to keep your batteries charged. The complete kit includes: 8 ft. of wire connected to the solar panel, 8 ft. of extra wire, battery clamps, O ring connector, fuse, and Quick Connect Technology for simple installation. The Sunforce 50013 1-Watt Power Sports Charger is the perfect solution for charging the batteries of motorcycles, personal water crafts, ATVs, snowmobiles and more. Constructed with amorphous solar cells, this solar panel is maintenance-free and extremely easy to install. With its built-in overcharge/discharge protection, this top-of-the-line solar panel works in all daylight conditions to keep your batteries charged. The complete kit includes 8 ft. of wire connected to the solar panel, 8 ft. of extra wire, battery clamps, O ring connector, fuse, and Quick Connect Technology for simple installation. Convenient charging for power sport vehicles Convenient Power That Helps Keep Your Batteries Charged This Sunforce solar charger lets you harness the power of the sun, the most powerful and plentiful source of energy available to us. Unlike nuclear and fossil fuels, solar power is clean and pollution-free, and the equipment requires very little maintenance to operate. Sunforce Solar Panels are effective in areas of both high and lower sun exposure, making them ideal for use in the United States The Power Sports Charger may be attached directly to your battery using either of the accessories included with the charger. Included with the charger are a set of â€œOâ€ Rings as well as a set of battery clamps. Both are equipped with quick connect technology to allow quick and easy connections. About Amorphous Sol...
The Renogy Wanderer is a 30A PWM charge controller. This advanced negative-ground controller is designed for off-grid solar applications and can be used with a 12V battery or battery bank. Integrating highly efficient PWM charging, the Wanderer increases battery life and improves system performance. The controller comes equipped with fully comprehensive self-diagnostics and electronic protection functions to prevent damage from installation mistakes or system faults. Negative grounding controller ensures the broader off grid applications and safety, especially to be used on a vehicle which has battery negative on the chassis. A little extra investment on the right charge controller will generate a much higher return and prevent system failure.
The Renogy Adventurer is a 30A PWM solar power charge controller that is designed to be used with photovoltaic systems. This advanced negative-ground controller is designed for aesthetically clean flush mounting on RV or camper walls. Integrating highly efficient PWM charging, the Adventurer increases battery longevity by regulating the charge flowing from the solar panels to the battery bank. It features an LCD screen for displaying system operation information and data, and allows for full control of parameter settings. The controller comes equipped with fully comprehensive self-diagnostics and electronic protection functions to prevent damage from installation mistakes or system faults.
The Etekcity Dual-Charge Solar Lantern is an extremely versatile source of light whether around the house, in the backyard, or on a camping expedition. Give the Solar Lantern a quick charge with the 5V DC cord or using the solar cells located at the top of the light. Omni-directional LED lights provide illumination in every direction around the campsite;adjust brightness when necessary using the Glow-in-the-dark operation button. 2-way charging for battery 1.Outdoor charging: Place the lantern in the sun, the solar panel will charge battery automatically. During charging, the red LED is on. 2.Indoor charging: Insert the USB plug of USB cable to USB port of AC/DC adaptor or PC and plug the round plug to lantern, battery will be charged and the red LED will be on. The fully charging time is about 2-3hours. Features: - Bright Omni-direction LED illumination - Lightweight Portable design - IP41 grade protection - Rustproof foldway handle for suspension and portablility use - Dual charge: solar and 5V DC - Adjustable brightness settings: Low/High - Low power consumption - Glow-in-the-dark button Specifications: - LED: 0.5w - LED Lifetime: 10 years - Solar Panel: 0.4w - Panel Size: 2.09 x 2.06 inch - Brightness Lifetime: Low: 14-25 Lux/8 hours High: 30-46Lux/4 hours - Battery: 3.2v,450mAh Lithium-ion rechargeable battery - Weight: 5oz Note: Do not open the lantern to use as liquid container. Please be sure that the lantern has been charged fully, or the light would be dim. Package Content 1x LED Dual-charge Solar Lantern 1x Charging Cable 1x User Manual
Sunforce 11240 1000 Watt Pure Sine Wave Inverter with Remote Control
The Sunforce 1000 Watt Pro Series Pure Sine Wave Inverter converts DC power into clean, stable AC power. Excellent for powering home appliances directly from your 12V battery, this inverter will supply stable power to run small electronic tools, air pumps, electronic doors, small motors and refrigerators that a modified sine wave inverter cannot. Pure Sine Wave inverters provide clean power with very low harmonic distortion, no static or humming noise. With a peak surge power of 2000 Watts and continuous power of 1000 Watts, this product is the ideal solution for power failure emergencies and guarantees optimum compatibility with sensitive equipment, computers, motors, televisions and more! Compact and portable, this inverter is perfect for use at worksites, on boats, or for permanent use in a solar power setup. The 11240 features numerous safety features including an overload alarm and LED light, a soft start system, low battery shut down, DC input overload voltage, output overload, overload temperature, short circuit shut down, and a high speed cooling fan. Equipped with two 110V household electrical outlets, this inverter is so advanced that it is patented. Your purchase comes with a DC/AC power inverter remote control modular connector cable and key chain remote.
Hompie Intelligent LCD 30A 12V/24V 360W/720W PWM Solar Charge Controller Regulator Adapter Charger For Street Lamp Base Station Solar Power Panel Energy System Environment Monitor Battery Wifi Hotspot
Intelligent solar controller, which is equipped with industrial-grade STM 8 microprocessor to control the charge and discharge process. And, it has perfect and liable battery charge and discharge period management. The charge circuit is characterized by high efficiency and low consumption by controlling the MOSFET of the ultra-low internal resistance with PWM. This controller has multiple load control modes and is adaptable to different industries. Solar Controller Specifications - Battery Voltage: 12V/24V auto - Max Discharge Current: 30A - Working Temperature: -35Â°C to +60Â°C - Self consume: â‰¤10mA - Float Charge: 13V(default, adjustable) - Discharge stop:10.7V(default, adjustable) - Discharge reconnect:12.6V(default, adjustable) - Size:133*70*32mm -USB Charge port: 5V 2A - PWM battery charging - All necessary protections equipped - Adjustable controlling parameter of the system - Compatible Battery: Lead-acid Cell Feature -Build-in industrial micro controller -Big LCD display, all adjustable parameter -Fully 4-stage PWM charge management -Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection -Dual mosfet Reverse current protection ,low heat production -Suitable for Home, Industrial, Commercial etc Package Includes -1 x Solar Charge Controller -1 x User Manual HOW TO USE it could recognize the solar output and adjust the voltage to match the battery specifications. For example, after receiving 24 volts from solar panel, if it has recognized the storage battery is 12 volt, the controller will send 24 volts into a 12 volt battery. NOTE: Please be sure to connect the battery first before your solar panel or the unit will not power up
Description MPPT circuit solar controllers are considerably more elaborate than PWM. The voltage of the solar panel changes with time of day and temperature. The optimum voltage for battery charging changes as the state of charge of the battery. The MPPT charge controller matches these voltages and can result in 30% more efficient transfer of power. This means good MPPT solar charge controllers can reduce the number of solar panels needed by up to 30% - a tremendous benefit. While only a small part of system price, a MPPT solar panel charge controller can leverage the rest of the system to better performance. Specifications Negative grounded Nominal System Voltage: 12V/24V Auto recognition Max. PV Input Power: 400W (12V), 800W (24V) Rated Charge Current: 40A Rated Discharge Current: 20A Max. Solar Input Voltage: 100VDC Self-consumption:
Specification: Solar panel power: 7V, 1.12W Solar panel size: 11 x 11cm Pump power: 7V, 160MA Max flow quantity of pump: 150L/H Max water height of pump: 45cm Cable lenght: about 320cm Life time: > 20000hours Working time: 8:00am - 5: 00pm(on sunny day) Delay: less than 3s Color: Black Net weight: 162g Package size: 11.5 x 11.4 x 5.3cm Package weight: 195g Restart: if sunshine is off, can restart within 3 Seconds when sunshine is back. The product is based on updating the brushless solar pump technology products, overcoming the shortcomings of hard start, low efficiency, poor stability of similar products and even easier to start than the same power brush pump. Package included: 1 x Solar fountain 1 x Small parts for mounting 1 x User manual
AGPtekÂ® 30A Solar Panel Power Battery Charge Controller / Regulator 12V / 24V 30 Amp with PWM Type of Charging (Automatic Lighting Control + Time Functions)
Specification: 1.Voltage: 12V/24V Auto Switch 2.Charge current: 30A 3.Load current: 30A 4.Empty load consumption:Â¡Ãœ6MA 5.Charge Circuit Voltage Drop:Â¡Ãœ0.26v 6.Discharge Circuit Voltage Drop:Â¡Ãœ0.15 7.Over voltage Protection:17V ,X2/24V 8.Increase Charge Voltage:14.6v,x2/24v(10min when discharging) 9.Direct Charge Voltage:14.4v,x2/24v(10min) 10.Float Charging:13.6v,x2/24v(till come down to charging recovery voltage) 11.Temperature compensation (mV/C): -5mv/Â¡Ã¦/2v 12.Operating temperature: -35 ~ +55C 13.Control mode: PWM 14.Maximum support 720Watt (24V) 15.360Watt (12V) 16.Dimension: 140mm*95mm*34mm How To Use? 1. Digital LED display shows the 16 lighting options (by switch with 5 seconds) 2. Number display, from 0 to 7, DC output. 3. Number display, from 0. to 7. 1Hz output. 4. Digital LED stop flash to confirm correct switch selection. 5. 10 minutes delay to make sure its real dark. Package: 1 x 30A solar charge controller 1x Users' Manual Trademark AGPtek products are marketed exclusively by Brainydeal, any misuse of AGPtek without prior approval from AGPtek will take legal action.