The Renogy Wanderer is a 30A PWM charge controller. This advanced negative-ground controller is designed for off-grid solar applications and can be used with a 12V battery or battery bank. Integrating highly efficient PWM charging, the Wanderer increases battery life and improves system performance. The controller comes equipped with fully comprehensive self-diagnostics and electronic protection functions to prevent damage from installation mistakes or system faults. Negative grounding controller ensures the broader off grid applications and safety, especially to be used on a vehicle which has battery negative on the chassis. A little extra investment on the right charge controller will generate a much higher return and prevent system failure.
The Wanderer is a negative ground controller. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. Any negative connection on the solar module, battery and load can be safely earth grounded as required
4 Stage PWM charging (Bulk, Boost, Float, and Equalization) prevents batteries from over-charging and over-discharging. Protection against: overcharging, overload, short-circuit, and reverse polarity
Compensates for temperature, automatically corrects charging and discharging parameters, and improves battery longevity.
LED Indicators that inform you about the charge controller's status
Compatible with Sealed, Gel, and Flooded batteries
Product Information Specifications for The Renogy Wanderer â€” 30A PWM Charge Controller Below:
The Renogy Adventurer is a 30A PWM solar power charge controller that is designed to be used with photovoltaic systems. This advanced negative-ground controller is designed for aesthetically clean flush mounting on RV or camper walls. Integrating highly efficient PWM charging, the Adventurer increases battery longevity by regulating the charge flowing from the solar panels to the battery bank. It features an LCD screen for displaying system operation information and data, and allows for full control of parameter settings. The controller comes equipped with fully comprehensive self-diagnostics and electronic protection functions to prevent damage from installation mistakes or system faults.
The Etekcity Dual-Charge Solar Lantern is an extremely versatile source of light whether around the house, in the backyard, or on a camping expedition. Give the Solar Lantern a quick charge with the 5V DC cord or using the solar cells located at the top of the light. Omni-directional LED lights provide illumination in every direction around the campsite;adjust brightness when necessary using the Glow-in-the-dark operation button. 2-way charging for battery 1.Outdoor charging: Place the lantern in the sun, the solar panel will charge battery automatically. During charging, the red LED is on. 2.Indoor charging: Insert the USB plug of USB cable to USB port of AC/DC adaptor or PC and plug the round plug to lantern, battery will be charged and the red LED will be on. The fully charging time is about 2-3hours. Features: - Bright Omni-direction LED illumination - Lightweight Portable design - IP41 grade protection - Rustproof foldway handle for suspension and portablility use - Dual charge: solar and 5V DC - Adjustable brightness settings: Low/High - Low power consumption - Glow-in-the-dark button Specifications: - LED: 0.5w - LED Lifetime: 10 years - Solar Panel: 0.4w - Panel Size: 2.09 x 2.06 inch - Brightness Lifetime: Low: 14-25 Lux/8 hours High: 30-46Lux/4 hours - Battery: 3.2v,450mAh Lithium-ion rechargeable battery - Weight: 5oz Note: Do not open the lantern to use as liquid container. Please be sure that the lantern has been charged fully, or the light would be dim. Package Content 1x LED Dual-charge Solar Lantern 1x Charging Cable 1x User Manual
Sunforce 11240 1000 Watt Pure Sine Wave Inverter with Remote Control
The Sunforce 1000 Watt Pro Series Pure Sine Wave Inverter converts DC power into clean, stable AC power. Excellent for powering home appliances directly from your 12V battery, this inverter will supply stable power to run small electronic tools, air pumps, electronic doors, small motors and refrigerators that a modified sine wave inverter cannot. Pure Sine Wave inverters provide clean power with very low harmonic distortion, no static or humming noise. With a peak surge power of 2000 Watts and continuous power of 1000 Watts, this product is the ideal solution for power failure emergencies and guarantees optimum compatibility with sensitive equipment, computers, motors, televisions and more! Compact and portable, this inverter is perfect for use at worksites, on boats, or for permanent use in a solar power setup. The 11240 features numerous safety features including an overload alarm and LED light, a soft start system, low battery shut down, DC input overload voltage, output overload, overload temperature, short circuit shut down, and a high speed cooling fan. Equipped with two 110V household electrical outlets, this inverter is so advanced that it is patented. Your purchase comes with a DC/AC power inverter remote control modular connector cable and key chain remote.
Hompie Intelligent LCD 30A 12V/24V 360W/720W PWM Solar Charge Controller Regulator Adapter Charger For Street Lamp Base Station Solar Power Panel Energy System Environment Monitor Battery Wifi Hotspot
Intelligent solar controller, which is equipped with industrial-grade STM 8 microprocessor to control the charge and discharge process. And, it has perfect and liable battery charge and discharge period management. The charge circuit is characterized by high efficiency and low consumption by controlling the MOSFET of the ultra-low internal resistance with PWM. This controller has multiple load control modes and is adaptable to different industries. Solar Controller Specifications - Battery Voltage: 12V/24V auto - Max Discharge Current: 30A - Working Temperature: -35Â°C to +60Â°C - Self consume: â‰¤10mA - Float Charge: 13V(default, adjustable) - Discharge stop:10.7V(default, adjustable) - Discharge reconnect:12.6V(default, adjustable) - Size:133*70*32mm -USB Charge port: 5V 2A - PWM battery charging - All necessary protections equipped - Adjustable controlling parameter of the system - Compatible Battery: Lead-acid Cell Feature -Build-in industrial micro controller -Big LCD display, all adjustable parameter -Fully 4-stage PWM charge management -Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection -Dual mosfet Reverse current protection ,low heat production -Suitable for Home, Industrial, Commercial etc Package Includes -1 x Solar Charge Controller -1 x User Manual HOW TO USE it could recognize the solar output and adjust the voltage to match the battery specifications. For example, after receiving 24 volts from solar panel, if it has recognized the storage battery is 12 volt, the controller will send 24 volts into a 12 volt battery. NOTE: Please be sure to connect the battery first before your solar panel or the unit will not power up
Description MPPT circuit solar controllers are considerably more elaborate than PWM. The voltage of the solar panel changes with time of day and temperature. The optimum voltage for battery charging changes as the state of charge of the battery. The MPPT charge controller matches these voltages and can result in 30% more efficient transfer of power. This means good MPPT solar charge controllers can reduce the number of solar panels needed by up to 30% - a tremendous benefit. While only a small part of system price, a MPPT solar panel charge controller can leverage the rest of the system to better performance. Specifications Negative grounded Nominal System Voltage: 12V/24V Auto recognition Max. PV Input Power: 400W (12V), 800W (24V) Rated Charge Current: 40A Rated Discharge Current: 20A Max. Solar Input Voltage: 100VDC Self-consumption:
Specification: Solar panel power: 7V, 1.12W Solar panel size: 11 x 11cm Pump power: 7V, 160MA Max flow quantity of pump: 150L/H Max water height of pump: 45cm Cable lenght: about 320cm Life time: > 20000hours Working time: 8:00am - 5: 00pm(on sunny day) Delay: less than 3s Color: Black Net weight: 162g Package size: 11.5 x 11.4 x 5.3cm Package weight: 195g Restart: if sunshine is off, can restart within 3 Seconds when sunshine is back. The product is based on updating the brushless solar pump technology products, overcoming the shortcomings of hard start, low efficiency, poor stability of similar products and even easier to start than the same power brush pump. Package included: 1 x Solar fountain 1 x Small parts for mounting 1 x User manual
AGPtekÂ® 30A Solar Panel Power Battery Charge Controller / Regulator 12V / 24V 30 Amp with PWM Type of Charging (Automatic Lighting Control + Time Functions)
Specification: 1.Voltage: 12V/24V Auto Switch 2.Charge current: 30A 3.Load current: 30A 4.Empty load consumption:Â¡Ãœ6MA 5.Charge Circuit Voltage Drop:Â¡Ãœ0.26v 6.Discharge Circuit Voltage Drop:Â¡Ãœ0.15 7.Over voltage Protection:17V ,X2/24V 8.Increase Charge Voltage:14.6v,x2/24v(10min when discharging) 9.Direct Charge Voltage:14.4v,x2/24v(10min) 10.Float Charging:13.6v,x2/24v(till come down to charging recovery voltage) 11.Temperature compensation (mV/C): -5mv/Â¡Ã¦/2v 12.Operating temperature: -35 ~ +55C 13.Control mode: PWM 14.Maximum support 720Watt (24V) 15.360Watt (12V) 16.Dimension: 140mm*95mm*34mm How To Use? 1. Digital LED display shows the 16 lighting options (by switch with 5 seconds) 2. Number display, from 0 to 7, DC output. 3. Number display, from 0. to 7. 1Hz output. 4. Digital LED stop flash to confirm correct switch selection. 5. 10 minutes delay to make sure its real dark. Package: 1 x 30A solar charge controller 1x Users' Manual Trademark AGPtek products are marketed exclusively by Brainydeal, any misuse of AGPtek without prior approval from AGPtek will take legal action.
HQRP Solar Charge Controllers are high quality, efficient and reliable Solar Power Regulators. Suitable for all 12/24v DC Lamps. They are perfect for rural electrification system. They offer a lot of possibilities and benefits. Can be used to control lighting devices. Regulations point: 14.4 Volts; Low voltage Disconnect: 11.1V Volts; Low voltage Reconnect: 12.6 Volts; Microcontroller digital accuracy; Type of Charging: Series PWM & stat of charge(SOC); 4 Stages: equalization, PWM, Boost and Float, temperature compensated charging; Electronic protections: Short circuit and over current-solar and load; Reverse polarity-solar, load, battery; Reverse current at night; Limits high voltage to protect loads; Lighting protection; Tropicalization: Conformal coated printed circuit board; Self-consumption: 6mA maximum. Solar Controller supports up to 150W of 12V Solar panels and up to 300W of 24V Solar panels. For 12V solar panels, please, use battery and load for 12V solar systems (For 24V solar panels, please, use battery and load for 24V solar systems). HQRP UV Meter: This meter shows you the level of UV and helps you protect your eyes and skin from negative sunlight effect. The color of the meter changes from very light purple to dark purple depending on the intensity of the UV lighting. The darker the purple color is, the more intense is the UV lighing.
docooler 10A 12V/24V Solar Charge Controller Solar Panel Battery Regulator Safe Protection
The product can automatically manage the working of solar panel and battery in solar system. It is easy to set up and operate.
Rated voltage: 12V or 24V
Rated charging current: 10A
Rated load current: 10A
Voltage of stop power supply: *10.8V or 21.6V
Voltage of resume power supply: *11.8V or 23.6V
Voltage of stop charging: *14V or 28V
Working temperature: -20 ~ +60Â¡Ã£C
temperature coefficient of voltage stop charge: -3mV / Â¡Ã£C / cell
Item size: 10.2 * 9.5 * 3.8cm / 4 * 3.7 * 1.5in
Item weight: 132g / 4.7oz
Package size: 11.5 * 10 * 4cm / 4.5 * 3.9 * 1.6in
Package weight: 136g / 4.8oz
1 * Solar charge controller
1 * User's manual